-----------------------------------------------------------------------------------------------------
OVERALL SYSTEM SPECIFICATIONS -
AT-ONE
-Frequency Range : 925 – 937.5
MHz
-Modulation Mode : FM
-Number of Frequencies : 2x
4-frequencies
-Simultaneous Frequencies : 6
-Maximum Deviation : +/- 33
kHz
-Operating Range : 60m, typical
-Operating Temperature : +5°C - +45°
C
-Frequency Response : 60 Hz - 16 kHz
-Frequency Stability : +/- 0.005%,
Phase lock loop frequency control
ATW-R1 RECEIVER
SPECIFICATIONS
-Receiving System : Antenna switching
diversity
-Image Rejection : 55dB minimum
-Dynamic Range : HH: 108 dB,
BP 103 dB (@ max deviation)
-Sensitivity : 10dBμV (S/N 60dB @ 20 kHz
deviation)
-Total Harmonic Distortion : <1% - 20 kHz deviation @ 1 kHz
-Level Control : Mic / Line (0 / -20dB)
-Antenna Input : BNC type, 50Ω -
BIAS voltage 12V DC 100mA each
-Audio Output : Unbalanced -2dBV
Balanced 4dBV
-Output Connectors : Unbalanced: 6.3 mm mono
jack
Balanced: XLRM-type
-Squelch Level : 2 μV (min) ~ 60 μV (max)
-Channel Select : 2-Digit
7-segment LED display
-Power Supply : 100-240 V DC12V 500mA
-Dimensions
: 200 mm x 42 mm x 122 mm (W x H x D)
-Weight : 418 g without
accessories
-Accessories Included : AC Adapter, Antennas, Rack mount adapter
-Optional System Accessory : AT8677 Dual rack mount kit
ATW-T1 BODY-PACK TRANSMITTER
-RF Output Power : 10 mW
-Spurious
Emissions : Following national regulatios
-Input Connections: Pin 1 :
GND
Pin 2: INST
Pin 3: Mic
Pin 4: DC Bias +10V
-Batteries (not
included) : Two 1.5V AA alkaline
-Battery Life : 10 hours - depending on
battery type and use pattern
-Dimension : 66 mm x 98 mm x 22 mm (W x H
x D)
-Weight : 71 g without batteries
-----------------------------------------------------------------------------------------------------
